cooled pmt housing high performance thermoelectric coolers C10372, c10373 series information furnished by hamamatsu is believed to be reliable. however, no responsibility is assumed for possible inaccuracies or omissions. specifications are subject to change without notice. no patent rights are granted to any of the circuits described herein. ?007 hamamatsu photoni cs k.k. subject to local technical requirements and regulations, availability of products included in this promotional material may var y. please consult with our sales office. specifications features the C10372 series and c10373 series are water-cooled thermoelectric coolers designed to reduce thermal electrons emitted from the photocathode of photomultiplier tubes (pmts) in order to improve signal-to-noise ratio (s/n ratio). the C10372 series further contains an electrostatic and magnetic shield that minimizes the influence of the ambient environment. the C10372 series are for 28 mm, 38 mm and 51 mm diameter head-on pmts, while the c10373 series are for mcp-pmts. parameter description / value cooling method heat exchange medium amount of cooling water cooling temperature (with cooling water at +20 c) temperature controllable range (with cooling water at +20 c) cooling time optical window material applicable pmts (sold separately) applicable socket assembly (sold separately) applicable pmt holder (sold separately) operating ambient temperature / humidity b storage temperature / humidity b weight thermoelectric cooling using peltier module water 1 l/min to 3 l/min (water pressuere: below 0.3 mpa) approx. -30 c -30 c to 0 c (continuously adjustable) approx. 120 min evacuated double-pane synthetic silica window with heater (185 nm to 2200 nm) 28 mm (1-1/8") dia., 38 mm (1-1/2") dia. and 51 mm (2") dia. head-on mcp-pmt (r3809u-50 series, r3809u-61/-63/-64) e2762 series a e3059-500 (r3809u-50 seriess, r3809u-61/-63/-64) +5 c to +40 c / below 75 % -15 c to +50 c / below 80 % C10372 5.8 kg / c10373 5.5 kg C10372 series c10373 series C10372 series c10373 series left: power supply right: cooled pmt housing thermoelectric cooling using peltier module about -30 c cooling temperature (with +20 c cooling water) evacuated, double-pane window with heater for frost prevention built-in electrostatic and magnetic shielding (C10372 series) internal protective circuit safeguards peltier element module in case of low water internal protection circuits prevent output short-circuit, output overvoltage, and excessive temperature rise in power supply stable operation due to a regulated power supply note: a see p.2 b no condensation power supply ac input voltage power consumption output voltage output current protection circuit operating ambient temperature / humidity b storage temperature / humidity b weight C10372, c10373 C10372-01, c10373-01 C10372-02, c10373-02 parameter description / value 100 v 10 v (50 hz / 60 hz) 120 v 12 v (50 hz / 60 hz) 240 v 24 v (50 hz / 60 hz) 200 v? 24 v to 27 v 4.2 a protective circuits to safeguard peltier element module in case of low water and to prevent output short-circuit, output overvoltage, and excessive temperature rise in power supply. +5 c to +40 c / below 75 % -15 c to +50 c / below 80 % 2.1 kg note: b no condensation components and accessories cooled pmt housing (including an input window) power supply light shield cap water hose clamps (2 pcs) connection cable (1.5 m) ac line cable (2.5 m: -02 type, 2.0 m: other types) socket assembly / pmt holder mounting screw (4 pcs) * to use these coolers, water hoses with an inner diameter of 15 mm and a water supply line with the matching round faucet are required. prepare those hoses of the desired length. in addition, prepare a filter for removing impurities such as chlorine ions.
tacc1040e02 sept. 2007 ip high performance thermoelectric coolers C10372,c10373 series hamamatsu photonics k.k., electron tube division 314-5, shimokanzo, iwata city, shizuoka pref., 438-0193, japan, telephone: (81)539/62-5248, fax: (81)539/62-2205 u.s.a.: hamamatsu corporation: 360 foothill road, p. o. box 6910, bridgewater. n.j. 08807-0910, u.s.a., telephone: (1)908-231-0960, fa x: (1)908-231-1218 e-mail: usa@hamamatsu.com germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49)8152-375-0, f ax: (49)8152-2658 e-mail: info@hamamatsu.de france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, telephone: (3 3)1 69 53 71 00, fax: (33)1 69 53 71 10 e-mail: infos@hamamatsu.fr united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road welwyn garden city hertfordshire al7 1bw, united kingdom, teleph one: 44-(0)1707-294888, fax: 44(0)1707-325777 e-mail: info@hamamatsu.co.uk north europe: hamamatsu photonics norden ab: smidesv ? gen 12, se-171-41 solna, sweden, telephone: (46)8-509-031-00, fax: (46)8-509-031-01 e-mail: info@hamamatsu.se italy: hamamatsu photonics italia: s.r.l.: strada della moia, 1/e, 20020 arese, (milano), italy, telephone: (39)02-935 81 733, fax: (39)02-935 81 741 e-mail: info@hamamatsu.it web site www.hamamatsu.com tacca0292ea tacca0293ea tacca0133ec tacca0130ed taccb0034ea taccb0100ea taccb0101ea e2762 series e2762-502 e2762-506 e2762-509 e2762-510 e2762-511 e2762-513 r980, r1387, r2066 r943-02, r3310-02 r464, r585, r649 r329-02, r331-05, r2257 r374, r2228, r5929 r375, r669 pmt cooling characteristics spectral transmission characteristics of optical window dimensional outline (unit: mm) sold separately (unit: mm) socket assemblies for C10372 series e2762 series mcp-pmt holder for c10373 series e3059-500 0 120 40 80 time (min) cooling temperature ( c) -40 -30 100 20 60 -20 -10 0 +10 +20 +30 cooling water ambient temperature : + 20 c : + 20 c 0 +30 +10 +20 cooling water temperature ( c) maximum cooling temperature ( c) -50 -40 -30 -20 -10 200 800 700 600 500 400 300 wavelength (nm) transmittance (%) 0 10 20 30 40 50 60 70 80 90 100 window flange (C10372 series) 52 86 95 100 8 50 +2 -0 window flange pmt evacuated window housing front panel 6-m3 s-100 o-ring 130 120 6-m3 s-100 o-ring window flange 130 120 52 86 95 100 window flange evacuated window housing front panel (c10373 series) pmt 61.5 8 69 73 housing (metal) socket housing (insulator) -hv: shv connector signal output: bnc connector 106 119 l 35 max. high voltage contact ring * the high voltage contact ring is used for internal electrical connection to the magnetic shield case in the cooler. l: e2762-502...133.5 e2762-506...144.5 e2762-509...106.5 e2762-510...106.5 e2762-511...120.5 e2762-513...120.5 192 119 69 67.2 0.2 73 13 60 222 2 35 max. 85 5 r3809u -hv : shv connector signal output : sma connector n 2 gas inlet housing (insulator) housing (metal) note: a housing power supply 215 275 8 35 max. 16 30 190 190 30 250 250 15 12.5 53 64 180 104.0 1.5 160 200 4-m4 rc 1/8 taper screw * the 1 mm thickness of the folded aluminum plate is not included in.
|
